5
90082,90084_03-17-14
P-3
P-2
P-1
D
B
B
D
6.) Insert two Cams (D) into the large predrilled holes in the Right Side Panel (P-1) and four Cams (D)
into the large predrilled holes in the Back Panel (P-3). Make sure the arrow on Cam (D) is to the out-
side and pointed to the connecting hole in the edge. Screw in two Camposts into each inside threaded
hole on the Left Side Panel (P-2) and the Right Side Panel (P-1) as shown in Illustration #5. Align
holes with the Camposts (B) while you push the panels together. Turn the Cams (D) one quarter turn
clockwise to lock the assembly together.
Illustration # 5
7.) Place Cams (D), with the arrows to the outside and pointing tom the connecting hole in the edge,
in the remaining open large predrill holes in Position the Assembly from Step 6 over the Assembly
from Step 5. Align the holes in the bottom of the Assembly from Step 6 with the Camposts (B) and
Wood Dowels (E) in the Top Panel (P-4) and mate the two Assemblies. Turn the Cams(D) one quarter
turn clockwise to lock into position as shown in Illustration #6.
8.) Insert the Top Grommet (F) into the cut-out in the Top Panel (P-4). .
Illustration # 6
D
E
B
P-4
F
Assembly from
Step 6
Assembly from
Step 5
