Moore Unidrill-W Series, Owner'S Manual

Page: 20 / 46

4.
Ensure the drill is not in tramline mode so that all the rollers turn.
5.
Wind calibration handle to prime rollers, once all pegs are full , empty
trays and reposition.
6.
Turn handle the required number of turns for the width of drill
according to the chart below.
Drill width (M) No. Turns of Handle.
4 37 .5
6 25 .0
7. Weigh the seed collected from both trays in Kg using an accurate set
of scales. The amount collected is equivalent to 1/40 th of a hectare.
Sowing rate (Kg/Ha ) = Weight collected (Kg ) x 40.
If the result is different to the target weight then adjust variator and repeat
process.
Calibration charts are the same as those in main manual.
20