www.miinet.com
Moore Industries-International, Inc.
- 21 -
User’s Manual
225-748-01L
February 2017
Security Settings
The default security password is 1. This is valid until the password is changed to another
value.
Password Setting
The STA can operate in one of three password modes (default is set to
Password Required
).
The password modes can only be changed by the Security Jumper. Please contact Customer
Support for more information.
Full Access
– Complete access to the STA configuration menu is permitted with no password
required for any read or write operations.
Password Required
– A one to four-digit access code is required to gain access to the STA
configuration menu. If the correct code is entered, full read and write operation is permitted. If an
incorrect code is entered, “WRONG PASWD” will appear for 3 seconds, and return user to View
menu, with read-only access to the View menu (see Figure 4.1.).
No Access –
The user is limited to read-only access to the View menu. “SYS LOCK” will appear
if user attempts to enter Main menu by entering “SEL”. Enter “SEL” a second time to return to
View Menu.
Note:
These security settings are only applicable to access via the front panel pushbuttons.
Security can be bypassed using the PC Configuration Software. See PC Configuration Software
section for more information
.
Programmable Current/Voltage Safety Trip Alarm
STA
HLPRG
SEC
TION 3
