Introduction
Thank you for purchasing this Mooni Product.
This manual contains important operating and safety instructions and we advise you to read and
save this manual.
Contents
1x Mooni TakeMe Lantern
with Speaker
1x USB to Micro-USB 2m
cable
1x Remote control
Charging
1.
Before first use, a full re-charge of the
internal
battery will be necessary.
2.
Insert the USB cable into the Micro-USB port
on
bottom or side of the lamp.
3.
Connect the USB Cable into any 5V USB power
socket. For example, a computer/laptop, vehicle,
power bank, or USB power adapter.
4.
A red light will indicate when the product is be-
ing charged. The red light will turn off when the
product is fully charged.
5.
Disconnect the USB cable from the lamp and
the power source. The Mooni product is now
ready to use.
How to take care of the internal battery:
Partial discharges with frequent recharges are much healthier for the li-ion battery than a long deep
discharge.
During a long storage period of your product, try to keep the li-ion battery at a charged level of about
50%
Note: The integrated rechargeable battery will lose its energy even while the product is not being
used. The rate of self-discharge is dependent on the state of charge, ambient temperature and other
factors.
A full recharge of the product immediately after storage and before use is recommended.
