MOON Equinox SE CD Player
Standard Remote Control Operation
The MOON Equinox
SE
CD Player uses the ‘CRM’ full-function remote control
(figure 3). It operates on the Philips RC-5 communication protocol and is can be
used with other Simaudio MOON components.
The ‘CRM’ remote uses two AA batteries (included). To install them, simply slide
the back plate off in the direction of the arrow; insert the batteries in the correct
direction and then replace the back plate.
To engage the CRM remote for use with the MOON Equinox
SE
CD Player, you
must first press the button labeled CD.
The POWER button located on the upper left will switch the CD Player to either
‘Stand by’ or ‘On’ mode.
Certain buttons found on this remote control perform identical functions to their
corresponding button located on the Equinox
SE
’s front panel. Please refer to
pages 7 through 9 for a more detailed description when noted:
0 thru 9 Direct access track number selection
OPEN/CLOSE Open/Close the Compact Disc drawer
DISPLAY Press Once: Changes the time display mode on front panel
(please refer to page 7 for the four time modes)
DISPLAY Press and hold: Turns the front panel display on and off
RANDOM Same as the “Random” button on the front panel
Stop playing the CD’s current track
Pauses the player
X
Play the compact disc loaded into the player
REPEAT Same as the “Repeat” button on the front panel
PROG Same as the “Prog” button on the front panel
Press Once: Go back to the previous track on the disc
Press and hold: Scan backward through current track
Press Once: Skip to the next track on the disc
Press and hold: Scan forward through current track
Figure 3: CRM Remote Control
____________________________________________________________________________________
Standard Remote Control Operation
11