MOON Equinox SE CD Player
Operating the Equinox SE
We recommend that you leave your MOON Equinox
SE
CD Player powered up at all times to maintain optimal performance.
In the event that you plan to be away from your home for a few days, powering off the CD Player may not be a bad idea.
Once fully “broken-in”, please keep in mind that your Equinox
SE
will require several hours of playing time before it reaches
its peak performance after you’ve powered it up again.
Turning on your MOON
Equinox
SE
for the first time
Prior to turning this CD Player on for the first time, make sure that every cable is properly connected to avoid any problems.
Then turn on your CD Player in the following manner:
1) Flick the main rocker switch labeled “POWER” to the ‘1’ (on) position on the rear panel.
2) Press the push button labeled “Standby” on the Equinox
SE
, the blue LED will confirm operation and the digital
display will show ‘no disc’. You are now ready to load a compact disc and begin listening to music.
On and Off Sequence
To avoid having any annoying noises (i.e. “thumps” and “pops”) emanate from your speakers when powering your Equinox
SE
on or off, you should
1) Always power up your Equinox
SE
CD Player before powering up your preamplifier and/or integrated amplifier.
2) Always power down your Equinox
SE
CD Player after powering down your preamplifier and/or integrated amplifier.
____________________________________________________________________________________
Operating the Equinox SE
10