background image

 
               

400M Power Amplifier

 

 

 

Important Safety Instructions    (cont’d) 

 

The lightning flash with the arrowhead symbol, within an equilateral triangle, is 

intended to alert the user to the presence of uninsulated “dangerous voltage” within 

the product’s enclosure that may be of sufficient magnitude to constitute a risk of 

electric shock to persons.  

 

The exclamation point within an equilateral triangle is intended to alert the user to the 

presence of important operating and maintenance (servicing) instructions in the 

literature accompanying the appliance. 

 

Marking by the “CE” symbol (shown left) indicates compliance of this device with the 

EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the 

European Community 

 

Please read all instructions and precautions carefully and completely before 

operating your Simaudio N

ē

o MOON 400M Power Amplifier. 

 

1.

 

ALWAYS

 disconnect your entire system from the AC mains before connecting or disconnecting any cables, 

or when cleaning any component. To completely disconnect this apparatus from the AC mains, disconnect 
the power supply cord plug from the AC receptacle. 

2.

 

The MOON 400M must be terminated with a three-conductor AC mains power cord which includes an earth 
ground connection. To prevent shock hazard, all three connections must 

ALWAYS

 be used. Connect the 

MOON 400M only to an AC source of the proper voltage; Both the shipping box and rear panel serial 
number label will indicate the correct voltage. Use of any other voltage will likely damage the unit and void 
the warranty 

3.

 

AC extension cords are 

NOT

 recommended for use with this product. The mains plug of the power supply 

cord  shall remain readily accessible. 

4.

 

NEVER

 use flammable or combustible chemicals for cleaning audio components. 

5.

 

NEVER

 operate the MOON 400M with any covers removed. There are no user-serviceable parts inside. An 

open unit, especially if it is still connected to an AC source, presents a potentially lethal shock hazard. Refer 
all questions to authorized service personnel only. 

6.

 

NEVER

 wet the inside of the MOON 400M with any liquid. If a liquid substance does enter your MOON 

400M, immediately disconnect it from the AC mains and take it to your MOON dealer for a complete check-
up. 

7.

 

NEVER

 spill or pour liquids directly onto the MOON 400M. 

8.

 

NEVER

 block air flow through ventilation slots or heatsinks. 

9.

 

NEVER

 bypass any fuse. 

10.

 

NEVER

 replace any fuse with a value or type other than those specified 

11.

 

NEVER

 attempt to repair the MOON 400M. If a problem occurs contact your MOON dealer. 

12.

 

NEVER

 expose the MOON 400M to extremely high or low temperatures. 

13.

 

NEVER

 operate the MOON 400M in an explosive atmosphere. 

14.

 

ALWAYS

 keep electrical equipment out of reach of children. 

15.

 

ALWAYS

 unplug sensitive electronic equipment during lightning storms. 

16.

 

WARNING:

 Do not expose batteries or battery pack to excessive heat such as sunshine, or fire or the like. 

 

 

____________________________________________________________________________________ 

Summary of Contents for 400M

















Reviews: