background image

 
               

400M Power Amplifier

 

 

 

Important Safety Instructions 

 

1.  Read these instructions. 
2.  Keep these instructions. 
3.  Heed all warnings. 
4.  Follow all instructions. 
5.  Do not use this apparatus near water. 
6.  Clean only with a dry cloth. 
7.  Do not block ventilation openings. Install in accordance with the manufacturer’s instructions. 
8.  Do not install near any heat sources such as radiators, heat registers, stoves or another apparatus that produces 

heat. 

9.  Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one 

wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third 
prong is provided for safety. If the provided plug does not fit into the outlet, consult an electrician for replacement of 

the obsolete outlet. 

10.  Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the 

point where they exit from the apparatus. Unplug mains cord during transportation. 

11.

 

Only use attachments and accessories specified by the manufacturer. 

12. 

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the 
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury 

from tip over. 

13.  Unplug this apparatus during lightning storms or when unused for long periods of time. 
14.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any 

way, such as when the power cord or plug has been damaged; liquid has been spilled or objects have fallen into the 

apparatus; or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 

15.  No naked flame sources, such as candles, should be placed on the apparatus. 

 

 

WARNING:  

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 

 

 

 
 
 

 

____________________________________________________________________________________

Summary of Contents for 400M

















Reviews: