Moomba Craz, Owner'S Manual

Page: 29 / 72

29
© 2016 Skier’s Choice, Inc.
DOCKING LIGHT SWITCH
The Docking Light switch supplies power to the
docking lights. Switch must be turned on
before lights will operate.
NOTICE
If any lights, bilge, stereo, courtesy lights, or accessories fail to operate, press the
appropriate circuit breaker located under the switch.
Switch configuration may vary slightly based on options. If you have any questions regarding operation, please contact your dealer or Skier's Choice, Inc.
COURTESY LIGHT SWITCH
The Courtesy switch supplies power to the
lighting throughout the boat.
NAVIGATION LIGHTS SWITCH
The Navigation Light switch supplies power to
the Bow Light, the Stern Light and the Pole
Light.
Operation (Refer to Illustration Below):
When underway during night time operation,
set the switch in the NAV position to activate all
of the running lights.
When docked or at anchor, set the switch, in
the ANC position to activate only the pole light.
BALLAST SWITCHES
The Ballast switches supply power to the
ballast pumps. Configuration may vary
depending on the number of ballast bags.
NAV Lights
ANC Lights
ACCESSORY SWITCH (2 POSITIONS)
The Accessory switch supplies power to an
extra circuit for accessories that may be added.
COURT
ON
OFF
LIGHTS
NAVIGATION
ANCHOR
ACC ACC ACC ACC ACC ACC
LEFT SIDE PANEL SWITCHES
ACC ACC ACC LEFT
BALLAST
FILL
EMPTY
ACC FRONT
BALLAST
FILL
EMPTY
ACC RIGHT
BALLAST
FILL
EMPTY
ACC BILGE
MANUAL
AUTO
RIGHT SIDE PANEL SWITCHES
M s
eRIes
s
WITCH
P
anel