21
Mooltipass Mini BLE User Manual – 2021/01/13
▪ Adjust the
screen brightness
of your Mooltipass;
▪ Make the Mooltipass display its
tutorial
the next time you plug it in;
▪ allow the Mooltipass to
display credentials
on its screen, when it is disconnected (e.g. on USB
battery or charger);
▪ enable
knock detection
and adjust its sensitivity. You need to remove your smartcard from the
Mooltipass to change these two settings. When this feature is enabled, knocking twice approves a
credentials sending request;
▪ make the screen of the Mooltipass
flash
when user action or input is required.
d)
Advanced Settings
The last three features of the ‘
Device Settings
’ tab are advanced settings.
▪ When enabled, the
Hash Display Feature
will display one hash string before and after unlocking
your smartcard. By checking that these hashes do not change over the life of your device, you can
make sure no one has tampered with your Mooltipass. You may read more on the topic in
this
document
.
▪ When you enter your PIN to unlock your smartcard, the default starting value of the digits is 0-0-0-
0. You can choose to
randomize this starting PIN
for security reasons.
▪ You can make your Mooltipass:
-
unlock your computer when it is unlocked; and
-
lock your computer when your smartcard is removed from the Mooltipass.
The different options in the
Lock
/
Unlock Feature
list lets you customize this for your environment.
Simply specify if a login and/or password should be sent after unlocking your smartcard. The
Mooltipass Mini will then send a credential stored inside an ‘_unlock_’ service in your database. For
help setting an ‘_unlock_’ service, please refer to section
III.a)
.
Password Only
Sends the password stored inside your ‘_unlock_’ service, after
unlocking your smartcard.
Login + Password
Sends the login and password stored inside your ‘_unlock_’ service,
after unlocking your smartcard.
Enter + Password
Simulates an
Enter
key press then sends the password stored
inside the ‘_unlock_’ service, after unlocking your smartcard.
