9
0688-SOM-00001, Rev: 02
© Tritech International Ltd.
4. SeaNet Pro
SeaNet Pro is Tritech’s proprietary software which enables control and communication to our full range of
products. SeaNet Pro is capable of displaying and outputting multiple sensors simultaneously. This means Sonar,
Bathy and PA Altimeter data can all be displayed on the same screen.
4.1 Software Overview
SeaNet Pro is Tritech’s survey data acquisition and logging software package. Seanet Pro can simultaneously run
and display several combinations of Imaging Sonar, Profiling Sonar, USBL Positioning, Bathymetric and Sidescan
sensors. Seanet Setup is used to display status of all connected nodes and to download new software and
firmware upgrades into the subsea devices.
4.2 System Requirements
In order to install and run SeaNet Pro to its full potential, the operating system should meet the
following system requirements:
Minimum
Recommended
Processor
2GHz
2GHz dual core
RAM
1GB
2GB
Graphics
3D hardware accelerated graphics card
OpenGL
Version 2.0 or greater
Display
1280x1024 (32bit colour)
1600x1200 (32bit colour)
Disk space
Serial
Hardware based, or USB converters for RS232 or RS485 communications
Networking
100MB/s (fast Ethernet)
1000MB/s (Gigabit Ethernet)
4.3 SeaNet Pro Software Installation.
Tritech Software is provided with each purchase of our equipment
either on CD-ROM or a USB memory stick.
Updates and latest versions of software can also be downloaded from
the Tritech website
www.moog.com/tritech
Once installed, you can launch the application from the desktop icon
or from the Start menu in windows.
Updates
Download the latest software versions from
www.moog.com/tritech
Tritech International Ltd continually develop our software so it is recommended
to check the website for updates regularly.
