Micron Gemini
0729-SOM-00004-01
Page 22 of 46
Fixing the Sonar Mounting Bracket to your vehicle at 0°
The Sonar Mounting Bracket has both Metric and Imperial mounting hole footprints to allow
easy mounting of the adapter. The following instructions assume that holes have been drilled
in a mounting plate for your vehicle. See “Mounting Bracket Details” for the imperial and Metric
holes layout.
Step 1
Use either the Metric or Imperial spaced
holes on the Mounting Bracket to fix to
your vehicle or mount. There are Metric
and Imperial screws provided to ensure
an easy installation regardless of locale.
The image above is for example only. The pole mount adapter is used as the mating plate.
Fixing the Sonar Mounting Bracket to the 10° Adaptor
In the following examples the Micron Gemini is to be mounted via the 10° tilt adapter to a pre
drilled mounting plate. See “Mounting Bracket Details” for the footprint for the holes required
for mounting.
The 10° Adapter has both Metric and Imperial mounting hole footprints to allow easy mounting
of the adapter. The following instructions assume that holes have been drilled in a mounting
plate for your vehicle. The example in this manual is given using Metric fitments.
Step 1
Place the 10° adapter onto the
vehicle or mounting plate with the
Tritech logo facing the forward
direction of the sonar, then use 4 of
mounting screws in the required
mounting holes.
The 10° adapter
needs to be fitted first as the
bracket covers the fixing holes
Step 2
You are now left with a fitted 10°
adapter and the mounting bracket.
