Outputs | 15
VCO 2
(R4, C1)
Audio output of VCO 2
See VCO 1.
VCO 2 SUB 1
(R4, C2)
Audio output of VCO 2 Sub-oscillator 1
See VCO 1 SUB 1.
VCO 2 SUB 2
(R4, C3)
Audio output of VCO 2 Sub-oscillator 2
See VCO 1 SUB 1.
VCF EG
(R5, C4)
Envelope output of the VCF envelope
generator
This is normalled to the CUTOFF input,
but try routing to any VCO for enveloping
FM or a RHYTHM for complex sequencer
motion.
SEQ 1
(R7, C1)
Sequencer 1 output
This can be routed to VCO 1 with SEQ 1
ASSIGN buttons, or use a patch cable
to route it to any VCO 2 parameters, the
CUTOFF for sequenced filter motion,
the VCA for sequenced accents, or any
RHYTHM for per-step rhythmic changes.
SEQ 1 CLK
(R7, C2)
The clock output of SEQ 1—generates a
clock whenever SEQ 1 moves.
Useful for synchronizing with external
instruments, play with patching it to the
CUTOFF or any VCO for very fast punchy
attack transients.
SEQ 2
(R7, C3)
Sequencer 2 output
This can be routed to VCO 2 with SEQ
2 ASSIGN buttons, or use a patch cable
to route it to any VCO 1 parameters, the
CUTOFF for sequenced filter motion,
the VCA for sequenced accents, or any
RHYTHM for per-step rhythmic changes.
SEQ 2 CLK
(R7, C4)
The clock output of SEQ 2
This generates a clock whenever SEQ 2
moves. See SEQ 1 CLK.
CLOCK
(R8, C3)
Master clock of Subharmonicon
Patch to TRIGGER input to trigger
notes on every clock pulse regardless of
RHYTHM settings, or connect to external
instruments for synchronization.
TRIGGER
(R8, C4)
A trigger output which is sent to the VCF
and VCA EGs
This differs from the CLOCK output in
that it only fires whenever SEQ 1 or SEQ
2 moves—which will be very different
from the CLOCK output depending on
the POLYRHYTHM settings. Connect to
external instruments, or try connecting
to VCO inputs, CUTOFF, or VCA for a
sharper attack transient.
Summary of Contents for Subharmonicon
Page 16: ...www moogmusic com ...
