Inputs | 12
Inputs
VCO 1
(R1, C1)
Controls the frequency of VCO 1
SEQ 1 can be patched to this input with
the SEQ 1 ASSIGN buttons, but you can
also connect SEQ 2 here, the VCA/VCF EG
here for envelope modulation, or VCO 2
for frequency modulation.
VCO 1 SUB
(R1, C2)
Controls the subdivision frequency of
both sub-oscillators of VCO 1
SEQ 1 can be patched to either SUB with
the SEQ 1 ASSIGN buttons. Try patching
VCO 2 or any of its sub-oscillators in here
for frequency modulation, or slow down
the VCA and VCF envelopes and connect
them here to run up and down the
subharmonic scale.
VCO 1 PWM
(R1, C3)
Controls the pulse-width of VCO 1
Connect either envelope here for
traditional envelope pulse-width
modulation, a sequencer here for different
timbres on each step, or the VCA output
for feedback-like harsher timbres.
VCA
(R2, C4)
Controls voltage input for the VCA
The VCA EG is normalled here, but by
patching either SEQ in here you can get
per-step velocity changes, or patch a
VCO here for amplitude modulation.
Listed in order left to right by row;
R (Row) and C (Column)
Summary of Contents for Subharmonicon
Page 16: ...www moogmusic com ...
