RATE, ENV, LFO/SWEEP, MIX, all of which are TRS 1⁄4" jacks that
accept moogerfooger EP1 (or equivalent) expression pedals, or control
voltages from two-circuit or three-circuit 1⁄4" jacks.
TAP/STEP IN 1⁄4" TRS phone jack – provides a means of syncing the
tempo of the MuRF’s Animation Patterns to the tempo of the music by
tapping an external footswitch (Moog FS-1, or equivalent) three times.
The ring connection of this jack is the STEP input which can be used to
advance the steps of the current pattern by +1 with a FS-1 footpedal or
Gate signal.
MIDI IN: Standard MIDI DIN input.
+9V POWER INPUT jack – a9VDC unregulated 300 mA power
adapter with positive center.
GENERAL SPECIFICATIONS
CASE: Black panel with hardwood sides – classic analog appearance.
DIMENSIONS: 9" x 6" x 2-1/2"
NET WEIGHT: 2 lb
SHIPPING WEIGHT: 4 lb, including power adaptor and instruction
manual
POWER REQUIREMENTS: 120 volt, 5W. 220 volt power adaptor
available on special order
Moog®, Moogerfooger®, and MuRF® are registered trademarks of Moog Music Inc.
©2009 Moog Music Inc.
MOOG MUSIC Inc. 2004E RIVERSIDE DRIVE ASHEVILLE, NC 28804
Phone: (828) 251-0090 Email: [email protected]
WEB SITE: www.moogmusic.com
Summary of Contents for MIDI MuRF MF-105M
Page 36: ......
