15
of change of Delay time by all controls (Delay Time control, Delay Time CV,
LFO, and MIDI control of Delay time). Larger values slow down the rate of
change, creating a “glide” effect for the Delay time.The default value on
each power cyle is 0
CC# 7
(MSB)/
CC#39
(LSB): Output Level Control
CC# 12
(MSB)/
CC#44
(LSB): Delay Time
CC# 13
(MSB)/
CC#45
(LSB): Feedback
CC# 14
(MSB)/
CC#46
(LSB): Mix Control
CC# 15
(MSB)/
CC# 47
(LSB): LFO Rate
CC# 16
(MSB)/
CC# 48
(LSB): LFO Amount
CC# 70
: LFO Waveform (0-15=Sine, 16-31=Triangle, 32-47=Square, 48-63=Saw,
64-79=Ramp, 80-95=Random Stepped, 96-127=Smoothed Random (Not
available on Front panel))
CC# 74
: Range (Flange/Chorus) (0-63=Flange, 64-127=Chorus)
CC# 91
: Bypass On/Off (0-63=Effect Off 64-127=Effect On)
THE FOLLOWING CC MESSAGES DO NOT CORRESPOND TO FRONT
PANEL CONTROLS, BUT EXTEND THE CLUSTER FLUX’S CAPABILITIES.
The Delay Time Range Multiplier multiplies the delay time by 2, 4 or 8
vastly extending delay time. This feature is for obtaining unusual/ lo-fi
echo effects. When the delay time is increased past the default maximum
delay time available on the front panel, the BBD Clock signal will be audible
CC# 71
: LFO Clock Divisions. Here is a list of values and associated rhythmic
divisions achieved with this CC.
CC# 72
: LFO Phase Reset- Sending any value of this CC message will restart
the LFO from the beginning of its waveform.
CC# 73
: Enable LFO Note Reset (0=Disabled, 64=Enabled) Enable or disable
the restarting of the LFO from the beginning of its waveform when the unit
CC71 VALUE
CLOCK DIVISION
CC71 VALUE
CLOCK DIVISION
0-5
4 Whole Notes
64-69
1/2 Triplet
6-11
3 Whole Notes
70-75
1/4 Note
12-17
2 Whole Notes
76-81
Dotted 1/8
18-23
WH+Dotted 1/2
82-87
1/4 Triplet
24-29
Dotted Whole
88-93
1/8 Note
30-34
Whole + 1/4
94-98
Dotted 1/16
35-40
Whole Note
99-104
1/8 Triplet
41-46
Dotted 1/2
105-110
1/16 Note
47-52
Whole Triplet
111-116
1/16 Triplet
53-58
1/2 Note
117-122
1/32 Note
59-63
Dotted 1/4
123-127
1/32 Triplet
