6.2 Risk of material damage to the
device
Radial jamming on the outer diameter
NOTICE!
Risk of material damage due to radial
jamming on the outer diameter.
The additional, non-calculated forces
which are generated when attaching addi-
tional components to the device can cause
bearing damage.
– Never attach additional components to
the outer diameter of the device.
Static indetermination
NOTICE!
Risk of material damage due to static
indetermination or centrifugal force.
The device is not suitable for absorbing
forces, e.g. static indetermination or centri-
fugal force.
– Only use the device in the environment
as approved by the manufacturer and
for the agreed purpose.
Static overdetermination
NOTICE!
Risk of material damage from static
overdetermination.
Static overdetermination is generated by
screwing the rotor and stator to the sur-
rounding. If no suitable measures are
taken to prevent the resultant forces, this
installation can cause the destruction of
the device.
– Only use the device in the environment
as approved by the manufacturer and
for the agreed purpose.
Missing seal
NOTICE!
Risk of material damage due to missing
seal.
Damage to the sealing system can lead to
damage to the device.
– Do not remove the lubricant from the
sliding discs.
– Adhere to the existing installation
dimensions for cartridge elements.
– Do not hit or knock sliding discs or sub-
ject them to any other form of mechan-
ical strain.
Rotostat • Operating instructions
20
