3 Product Description
Activation
© Moog GmbH User Manual "D633-A Series" (CA80942-001; Version 1.0, 12/08) 18
3.4 Activation
Activation of the valves
The valves are controlled with a command signal via the valve connector X1.
Chapter "3.1.3 Signal interfaces", page 12
Chapter "3.5.2.10 Command signal identification", page 23
3.5 Nameplate
Nameplate
Figure 7: Nameplate (example)
3.5.1 Model number
Model number
The model number is set out as follows:
Example:
D633-184B
Nameplate
Item Designation
Further information
1
Model number
Chapter "3.5.1 Model number", page 18
2
Type designation
Chapter "3.5.2 Type Designation", page 19
3
Serial number
4
Optional customer-specific
designation
5
Hydraulic symbol
6
Date of manufacture in MM/YY
format
7
Optional version identification
8
Maximum operating pressure
Chapter "4.2 Hydraulic data", page 26
9
Command signal
Chapter "3.5.2.10 Command signal identification",
10
Supply
No additional supply voltage necessary.
The valves are controlled with a command signal via
the valve connector X1.
Pin assignment of valve connector X1:
Chapter "8.2 Valve connector X1", page 43
11
Data matrix code
Chapter "3.5.3 Data matrix code", page 23
D633
•
• • •
•
series
specification status
-: standard specification
Z: special specification
model
optional factory identification
