background image

                                   

Specifi cation           Cat a log

                                                Number                    Section

INSTRUCTIONS                       5084          

3

MODEL:  Accessories
SPVC5164, SPV050

PRODUCT INSTRUCTIONS

MODEL SPVCP5164

STANDARD ACCESSORIES (Sup plied)

 

    1- SPVCP5164 Surge protector 
    1- Surge Protector Plate    
    1-  1/4"-20 Bolt, nut 
    2- Lock Washers 
    4- #6 Sheet Metal Screws    

INSTRUCTIONS:
1

.  Mount Surge Protector Plate to the bottom of the Surge

    Protector using the (4)#6 sheet metal screws provided.  
    

NOTE:

  These screws are already installed in the bottom of 

                the surge protector.  Remove them temporarily to  
                install mounting plate.

2

.  Connect the wires and coax cables to the Surge Pro tec tor.

3

.  Attach the wire lead to ground screw on the SPVCP5164

    and attach the other end of the wire lead to ground on 
    the bolt.

I

NSTRUCTIONS FOR USE WITH VL22/39/35 HOUSING

1.

 Mount the Surge Protector Plate to the side of the P/T 

    mounting bracket using the 1/4-20 stud on the P/T 
    mounting bracket and the (1) 1/4"-20 bolt pro vid ed with 
    standard accessories.

NOTE

:   You will have to mount both heater strips to one side  

            of the pan/tilt bracket.  Use fl at washers be tween 
            heaters to space apart.

2

.  Slide (1) Lock Washer on each bolt, then secure the bolt

    with hex nuts.

3

.  Attach the wire lead to the ground screw on the SPVCP5164 

    and attach the other end of the wire lead to ground on 
    the bolt.

INSTRUCTIONS FOR USE WITH SS20I/VLSE16
1

.  Mount the surge protector to the inside wall of the housing. 

    Mounting studs are already provided for this ap pli ca tion.

2

.  Attach the wire lead to the ground screw on the SPVCP50 

    and attach the other end of the wire lead to the ground
    bolt on the terminal block.

2525 Park Central Blvd.

 • Decatu

r,

 Ga  30035 • (770) 987-7550 • 800-554-1124 

U.S.

 & Canada • www.videolarm.com • 

F

ax 800-826-03

66

MODEL SPVO50

INSTRUCTIONS:
1

.  Connect SPVO50 in line with camera coax cable.

2

.  Attach the wire lead to the ground screw on the SPVO50 

    and attach the other end of the wire lead to ground on 
    the terminal block.

SURGE PROTECTOR

PLATE

SPVCP5164

24VAC

CONTROL

CONTROL

24VAC

VIDEO OUT

VIDEO IN

OUT

IN

P/T M O

GROUND

(VL22/29/35)

P/T MOUNTING 

SPVC5164

SPVO50

REVISION DATE: May 16, 2003

Reviews: