- -
!
!
ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY):
Power 24Vac, Class 2 Only
Total Power: 52 watts
Accessories (Heater/Blower): 26 watts
Heater: 25 watts
Blower: 1 watt
Camera Power: 26 watts
NOTE:
This unit is designed for operation in an
upright position. Installing the housing
upside down may cause damage to
the internal equipment, and will void the
warranty.
Be sure the bracket is properly and securely mounted
to a supporting structure capable of rigidly holding
the weight of the entire unit.
GENERAL INSTRUCTIONS:
Tools Required: .100" Flat Head Screwdriver
Phillips Head Screwdriver
RHW75CN2, RHP75CN2
IP Ready Network Housing
IP Ready Network Housing with 24Vac input, wall mount or
pendant mounting, heater & blowers, ready for standard IP
PTZ cameras.
Includes 120 to 24Vac, 40Va transformer.
NOTE:
(
1) 100Va transformer is provided for
Accessory and Camera Power.
ASSEMBLING THE UNIT:
1. Remove content from all boxes.
Contents should include:
Main Housing Assembly
Either with wall mount or pendant bracket
Dome Assembly - Clear or Tinted
Do
not
remove the protective film until the product is
assembled and installed.
4 Packet Assemblies
(2) 40Va Transformers
