Tips
04
Change channel to avoid interference
Air P10 has 4 individual signal channels, allow 4 pairs of Transmitter and
Receiver to work simultaneously. Multi-channel design allows users to change
to alternative channels when the connection becomes weak or affected by
electromagnetic interference.
Plug-to-use
Users can simply power on the unit, plug in and enjoy.
Multi-Receiver.
Air P10 allows couples of Receivers to share one single Transmitter. For
example, Users could utilize Air Plug to build real stereo amplifier set up with
one Transmitter and two Receivers plugged into two amplifier, they should be
all in the same channel.
Power Saving Mode
Air P10 will automatically change to Power Saving Mode after being 10
seconds without receiving any signal, to saving power and cut the background
noise. Air P10 will exit Power Saving Mode as soon as it receives signal again.
Charge
Air P10 allows being charging by a USB power supply. The cable comes with
the unit can be used to charge two devices simultaneously, with the USB ports
on your computer or a wall charger. Low quality 3rd party cable may cause
charge issue.
Position
Air P10 can be adjusted the angel of the Transmitter and Receiver to achieve
the best result.
Antenna
The Antenna is at the bottom of Air Plug. For best result, recommend not to
cover the bottom of the unit.
EN
