6
www.DeubaXXL.de
WARNING!To help avoid personal injury:
Follow all instructions before use.
The jack is lifting device only.
Never get under the vehicle or start or run engine while the vehicle is supported by the
jack.
Lift only on areas of the vehicle and program for changing tire as specified by the vehi
-
cle manufacturer.
Always use jack stands when working under the vehicle.
OPERATING PROCEDURES
Please, before the first use treat the thread spindle with industri-
al fat.
1. BEFORE CHANGING TIRE
Park on a level surface.
Shift automatic transmission to “Park” or manual transmission to “Reverse”.
Set parking break and turn on hazard warning flasher.
Block fronts and rear of tire diagonally opposite the tire to be changed.
Loose wheel nuts but do not remove them.
Turn the jack’s handle clockwise to raise jack.
Put the jack under vehicle at bracket nearest the tire to be changed.
Raise jack until the saddle fits in bracket.
2. TO RAISE VEHICLE
Raise the vehicle until the tire is off the ground. Remove the wheel nuts and then the
tire. Remove dirt and rust from the wheel and wheel mounting surfaces as soon as pos
-
sible. Tighten each nut by hand until the wheel is held against the hub.
3. TO LOWER VEHICLE.
Lower the jack completely.
Tighten wheel nuts .
Remove wheel blocks from the blocked tire.
Securely store the tire and all jacking equipments.
MAINTENANCE, INSPECTION AND ALTERNATION !
Keep your jack clean and well lubricated with properly grease every three months.
When not in use , always leave the jack in full down position.
Visual inspection shall be made before each use of the jack by checking for abnormal
conditions , such as cracked welds, and damaged or missing parts.
Because of the potential hazards associated with the jack, no alternations shall be
