![Monuments IRON I Installation And Operation Manual Download Page 29](http://html.mh-extra.com/html/monuments/iron-i/iron-i_installation-and-operation-manual_1831127029.webp)
29
D
Please be sure to note!
Do not insert sauna rocks too tightly in the rock
store. Place them loose, leaving as many spaces
as possible to allow the free fl ow of hot air for
circulation purposes.
Remove stones from the sauna heater only
when they cooled down.
It cannot be excluded that hot rocks or their
parts fall out of the rock store.
Risk of fi re!
The sauna stones should be checked at least once
per year for their condition and if necessary re-
placed.
The sauna stones should loaded in the rock store
so that there is no direct thermal radiation of he-
ating elements to the sauna wall.
Sauna stones are a natural product. Check the sauna
stones at regular intervals. Aggressive sauna essen-
sces can weaken the sauna stones and cause them to
break apart over time. Consult your sauna supplier
if necessary.
Rinse the sauna stones provided under running wa-
ter and then place them in the stone compartment
so that the convection air fl ow can circulate easily
between the stones (Illust. 9 + 10).
The quantity of stones is suffi cient to create a steam
shock, vaporizing about 10 cl of water per m³ cabin
volume. Always wait 10 minutes after infusion be-
fore repeating the infusion. Only then the sauna
stones will re-heat suffi ciently again.
Never add more essences or volatile
oils than advised on the packaging. Never
use alcohol or undiluted concentrates. Cau-
tion!
Fire hazard!
All sauna heating units are made of low-corrosion
material. To enjoy your sauna heating unit for a long
time you should ensure maintainance and take due
care about the heater. Always make sure that the air
supply vents and refl ection surfaces in the area of
air intake are free. These can easily become clogged
with fuzz and dust when drawing in fresh air. This
reduces the air convection in the sauna heating unit
and can be a cause of too high temperatures.
Clean or de-scale the heater when needed. Refer to
your sauna supplier or directly to the manufacturer
in case of defects or signs of wear and tear.
Only use original manufacturer‘s replacement parts,
which can be obtained from your supplier or directly
from the manufacturer.
If you did not use your sauna for a long period
of time, always check before next use that clo-
ths, cleansers or other objects have not been
left on the sauna heating unit or the vaporizer
before turning them on.
Sauna rocks
Maintenance and care