Tools will be needed for gas conversion
Natural Gas Conversion
WARNING! FAILURE TO HEED THESE WARNINGS COULD RESULT IN A FIRE OR
EXPLOSION THAT
COULD CAUSE SERIOUS BODILY INJURY, DEATH OR PROPERTY DAMAGE.
Natural Gas Conversion must be performed by a QUALIFIED GAS TECHNICIAN ONLY. The
QUALIFIED GAS
TECHNICIAN should ensure compliance of local codes, including but not limited to,
requirements and installation
of grill regulator. DO NOT ATTEMPT TO CONVERT YOURSELF. Improper conversion could
result in a gas leak
which could cause a fire or explosion and cause serious bodily injury, death or property
damage. Leaks due to
improper conversion could occur immediately or slowly over time. If you hear any unusual
noises or leaks, smell
gas or unusual odors, or notice anything unusual with the operation of your gas appliance
after the installation,
immediately shut off the gas supply and discontinue use until the appliance is repaired by a
QUALIFIED GAS
TECHNICIAN.
Below parts are needed for natural gas conversion:
INCLUDED
§
Natural gas orifices(Preinstalled In Grill)
§
Quick Connector
§
10 ft (3.0m) Natural Gas Hose
§
10 ft (3.0m) Natural Gas Hose
§
4” Water Column Regulator with Hose
§
Orifice Sockets
§
Slot screwdriver
NOT INCLUDED
§
House Supply Line
§
Wrench
§
Philips screwdriver
3
Included
Included
Not Included
Not Included
