5
•
The appliance must not be installed behind a lockable door,
a sliding door or a door with a hinge on the opposite side to
that of the washing machine, it is not intended to be built-in.
•
Water and electrical connections must be carried out by a
qualified technician in accordance with the manufacturer‘s
instructions and local safety regulations.
•
Remove all packaging material and transport bolts before
installing
the appliance. Otherwise, serious damage may
result. Transit
bolts should be retained in case the appliance
needs to be moved in the future.
•
This appliance is equipped with a single inlet valve and can
be connected to the cold water supply only, making sure
that the new hose supplied is used rather than the old one.
•
Check the connections of the water inlet hose, the water tap
and the outlet hose for possible problems due to changes of
water pressure. If the connections loosen or leak close the
water tap and get it repaired. Do not use the appliance
before the pipes and hoses are installed properly by
qualified persons and checked for any leaks.
•
To ensure your safety the mains plug must be plugged in to
a suitable 13amp switched wall socket which is properly and
reliably earthed. If you notice any discolouring or damage to
the wall socket this must be replaced by a qualified person
straight away.
•
Always unplug the appliance and turn off the water supply
after use and especially if the appliance is not to be used for
a prolonged period of time.
•
Mains plug must be accessible after installation.
SAFETY INSTRUCTIONS
