INSTALLATION
9
•
Install on a dry, rigid and level surface.
•
Avoid direct sunlight.
•
Make sure the appliance has sufficient
ventilation.
•
Room temperature is above 0
℃
•
Keep far away from the heat resources such as
heating pipes/radiators
Before installing the appliance ensure that all below
points are adhered to
:
Unpacking the washing machine
•
Remove the cardboard box and styrofoam packing.
•
Lift the washing machine and remove the base
packing.Make sure that the small triangle of foam is
also removed with the bottom packing.If not then
carefully tilt the appliance backwards so that you can
manually remove the foam part.
•
Remove the tape securing the power supply cord
and drain hose.
•
Remove the inlet hose from the drum.
•
Stability is extremely important for quiet and
vibration free running
.
•
Make sure the appliance doesn't stand on
the mains cable.
！
Warning!
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
There is a risk of suffocation ! Keep all packaging
well away from children.
！
Warning!
Installation
