6
Section 1. Installation
N.B. Full Dimensions are shown in Section 5. (Page 14/15/16)
A qualified installer must carry out the installation.
This appliance can be used fully ‘vented’ via a ducting hose (not supplied)
and external wall vent, or in ‘re-circulation’ mode by using the charcoal
filter(s) provided.
You must use a charcoal filter in re-circulation mode.
Do not fit a charcoal filter when venting to the outside.
Position the wall bracket against the wall and mark out the position of the 3
holes. Drill 3 8mm holes and secure the bracket to the wall with the fixings
supplied.
Now drill four extra holes in line with the holes on the back of the cooker
hood
Hang the cooker hood onto the wall bracket and secure
