Section 4: Maintenance
5) There are two plastic hole c aps located on the appliances left hand
side in the middle beam, remove these, and insert them into the two
holes which are visible as a result of removing the middle hinge bracket
on the right hand side.
6) Insert the freezer door on the lower hinge pin and balance it there.
Turn the middle hinge bracket 180 degrees and slot the pin into the
top of the freezer door; now fix the middle hinge to the cabinet using
the screws.
7) Regarding the top hinge bracket
that was removed earlier. Remove
the screw that holds the hinge on to
the bracket (1). Remove the hinge pin
(2) using a flat head screw driver and
assemble on the reverse side (3).
8) Remove the top hinge screw cap carefully.
9) Swap the bush in the top of the refrigerator
door over to the opposite side. On the bottom
of the refrigerator door a metal door stopper is
attached via a screw, remove this.
In the instruction manual bag, there is a similar
metal stopper this is for use when you reverse
the doors. Attach the stopper to the opposite
end of the door.
10) Fix the top door hinge bracket to the top of
the left hand side of the cabinet. Balance the
refrigerator door on the middle hinge pin.
12