EN -22-
1. USE OF PRODUCT
Use of Gas Burners
Ignition of the Burners
The position symbol above each control knob determines the burner that the knob controls.
Manual ignition of the gas burners
If your appliance is not equipped with any ignition aid or in case there is a failure in the
electric network, follow the procedures listed below:
For hob burners:
Push in the knob of the burner you wish to ignite and keep it pressed
while turning anticlockwise so that the knob is in the
„maximum‟ position. Continue
pressing the knob and hold a lighted match, taper or other manual aid to the upper
circumference of the burner. Move the ignition source away from the burner as soon as
you see a stable flame.
For oven burner:
Push in and turn the oven control knob anti-clockwise so that the
knob is in the
„maximum‟ position. Hold a lighted match, taper or other manual aid to to
the ignition hole that is located on the front left corner of the burner. Move the ignition
source away as soon as you see a stable flame.
For grill burner:
Push in and turn the grill control knob clockwise so that the marker on
the knob points at the grill sign. Continue pressing the knob and hold a lighted match,
taper or other manual aid to the holes on the burner. Move the ignition source away from
the burner as soon as you see a stable flame.
Electrical ignition by spark button
Push in the knob of the burner you wish to ignite and keep it pressed while turning anti-
clockwise so that the knob is in the maximum position. While keeping the knob pressed
in, push the ignition button. Make sure that you press the ignition button immediately as
a delay could cause a build up of gas which may result in the flame spreading. Continue
pressing the ignition button until you see a stable flame on the burner.
Control of Hob
Control of the hob burner
The knob has 3 positions: Off (0), maximum (big flame symbol) and minimum (small
flame symbol). Ignite the burner with the knob in the maximum position; you can then
adjust the flame length between the maximum and minimum positions. Do not operate
the burners when the knob is between the maximum and off position.
