15
Error Codes are as follows:
E1:
Cooling fan is disabled, call the Repairtech helpline.
E3:
Supply voltage is over the rated values, turn off the hob and wait until
“H” disappears from all zones. Turn the hob back on and continue to use,
if the same error appears again, call the Repairtech helpline.
E4:
Supply frequency is different from rated values, turn of the hob and wait
until
“H” disappears from all zones. Turn the hob back on and continue to
use, if the same error appears again, call the Repairtech helpline.
E5:
The internal temperature is too high, turn the hob off and allow the heat
zones to cool down.
E6:
Communication error between touch control and heat zone, call the
Repairtech helpline.
E7:
Coil temperature sensor is disabled, call the Repairtech helpline.
E8:
Cooler temperature sensor is disabled, call the Repairtech helpline.
E9:
Calibration error, call the Repairtech helpline.
If after the previous checks there is still a fault, please
contact the Repairtech Service Helpline below. Please
ensure that you have the model number, serial number,
date of purchase and retailers information available
before you make the call.
Should your appliance develop a fault, please call the
Repairtech Service Helpline on:
01527-888133
