12
Child Lock:
After switching on the control, the child lock function can be activated. To activate the
child lock, simultaneously operate the increase heat setting key
and decrease heat
setting key
, and then operate the increase heat setting key
again.
“
L
” meaning
LOCKED will appear in all the heater displays and the control cannot be changed.
The hob will remain in a locked condition until it gets unlocked, even if the control has
been switched on and off.
To deactivate the child lock, simultaneously operate the increase heat setting
key
and decrease heat setting key
, and then operate the decrease heat setting
key
again. The
”
L
” symbol, meaning LOCKED should now have disappeared.
Key Lock:
While the Key Lock function is active it is only possible to switch the appliance off. If
the key lock button
is pressed and held for two seconds the lock will be activated
and acknowledged by a buzzer. After this two second period the key lock indicator
will flash and the heater will be locked.
Timer function:
The timer function is available for the following situations:
Minute minder timer (1-99 min):
The minute minder timer can be operated if the cooking zones are switched off. The
timer display shows
“00” with a blinking dot.
Touch
to increase the time or touch
to decrease the time. You can adjust the
timer between 0 and 99 minutes. If there is no further adjustment within 10 seconds,
the minute minder timer will be set and the blinking dot will disappear.
When the time is over, a signal sounds and the timer display blinks. The sound signal
will be stopped automatically after 2 minutes and/or by operating any key.
The minute minder timer can be changed or switched off at any time by operating the
timer setting key
and/or decrease timer key
. Switching off the hob by touching
at any time will also switch off the minute minder timer.
Cooking zone timer (1-99 min):
When the hob is switched on, an independent timer can be programmed for every
cooking zone. Select a cooking zone, then select the temperature setting before
finally activating the timer setting key
, the timer can be programmed as a switch
off function for a cooking zone. Around the timer four LEDs are arranged which
indicate for which cooking zone the timer has been activated. The timer display will
show which timer will run out next and when a timer has run down, a signal sounds
and the timer display shows
“00”. The programmed cooking zone will be switched off
and the
“
H
” will display if the cooking zone is hot. The sound will stop after two
minutes or by operating any key.
