6
•
Secure the base of the hood into the cabinet using the screws provided as
shown in Pic. 4 above.
•
Connect the outlet to the main casing as shown in Pic. 5 above.
•
Connect the casing to the body of the hood with the screws provided as
shown in Pic. 6 above.
•
Connect the vent hose to the appliance and the wall outlet.
N.B. Your installer will supply a wall outlet and may have to supply a suitable
alternative flexible duct to suit the wall outlet.
This appliance must not share the same air outlet as another appliance,
i.e. gas heating outlet.
•
The mains lead should be connected to a suitably positioned fused electrical
spur, protected by a 3amp fuse.
•
Ensure that dust and debris is cleaned up from the immediate area of the
appliance prior to it being switched on and tested for the first time.
•
If you intend to use the unit in re-circulation mode, i.e. without external
ventilation, you must fit & use the charcoal filter as follows:
•
Remove the aluminium filter
•
Position the charcoal filter to the back of the aluminium filter using the metal
strips provided (3 on MON-DDCH60 & 4 on MON-DDCH90).
•
Refit the aluminium filter.
Please note that the installation of the charcoal filter may reduce the suction power
of the appliance.
