Montiss CSC5623M, User Manual, Page: 24 / 51

24
English
AFTER USE
Window attachment – Push the window attachment onto the head until you hear it click into
place. You can now fit the window attachment to the concentration nozzle by pushing it into
place, and remove it by pulling it off after the work has been completed. Perfect for cleaning
windows, mirrors, ceramic tiles and surfaces and other non-porous, smooth surfaces. Apply the
steam evenly to the glass surface from a distance of about 20 cm. Then switch the steam off and
wipe the moisture off the glass from top to bottom in strips using the rubber squeegee. Wipe
the rubber squeegee and the lower edge of the window dry after every strip.
Attention : glass surfaces can be shattered by the sudden application of excessive heat. Before
cleaning such glass surfaces with the steam-cleaner, warm them up by applying steam to the
surface from a distance of 20-25 cm. Continue by applying steam from a distance of 10-15 cm.
Remove the plug from the socket before fitting or changing accessories. The accessories will
become hot during use – allow them to cool down before replacement.
Switch the cleaner off and remove the plug from the socket. Wait until the cleaner has cooled
down completely. Empty the water tank. Allow the inside of the water tank to dry out before
replacing the lid. Store the unit in a dry area safely out of the reach of children.
Attention: before opening the lid to empty the tank, release the steam pressure by pressing the
steam trigger on the steam gun, or allow the cleaner to cool down completely.
POWER CABLE WINDING-SYSTEM
(Illustration 12)
(located at the bottom of the device)
To wind up the power cable at the bottom of the device, you must press the middle of the round
circle at the bottom of the device. (A) Then lift it up and turn it 180 degrees. Underneath you will
notice a small lever. (B) Slide this down, in the direction of the wheels. (C) With both edges
firmly in position you will be able to fully wind the power cord around this. To restore everything
to the original state you repeat the above-mentioned steps in reverse order.