23
GB
MBX
®
Die Blaster
®
Operating instructions
Service instructions
8.
All service work on the tool is only to be undertaken by qualified workshop personnel or the dealer where you pur-
1.
chased the tool. Repair or servicing by unqualified personnel may result in injuries and/or damage to the tool.
Only use genuine spare parts on servicing this tool. If parts that are not approved are used or maintenance
2.
instructions are not followed, the warranty will be rendered void and there may be a risk of injury.
Troubleshooting
9.
Fault
Cause
Solution
Belt does turn or
turns slowly
Compressor is not operating
Switch on or check compressor
Filter or compressed air hose blocked
Clean compressed air line
Insufficient compressor pressure
Increase compressor pressure
Inadequate compressor performance
Use more powerful compressor
Compressed air hose too long
Use compressed air hose of suitable length
Diameter of compressed air hose too small
Use compressed air hose of suitable size
Compressed air motor insufficiently lubri-
cated
Add a few drops of oil to the compressed air
connection
Valve or valve sealing ring faulty
Servicing by qualified engineer
Unusual noise
Mechanical parts insufficiently lubricated
Servicing by qualified engineer
Belt or other machine parts faulty
Fit new belt / servicing by qualified engineer
Water entering the machine via the com-
pressed air supply
Servicing by qualified engineer
Heavy vibration of
the rotating belt
Adaptor system is not fastened correctly
Re-fit adaptor system
Foreign body jammed between spindle and
adaptor system
Remove object and re-fit
Adaptor system worn
Use new adaptor system
Belt faulty
Fit new belt
Adaptor system
comes undone in
operation
Screw not tightened or serrated lock washer
not used
Use serrated lock washer and tighten screw
Screw / serrated lock washer worn
Use new screw / serrated lock washer
Summary of Contents for MBX Die Blaster
Page 2: ......