Montgomery Ward SG775185, Instruction Manual, Page: 6 / 8

1
•
888
•
557
•
3848 wards.com
10 11
Notes
Problem Possible Causes Likely Solutions
Tool will not start. Cord not connected.
No power at outlet.
Tool is overheated.
Check that cord is plugged in.
Check outlet and circuit breaker.
Turn off, unplug and let tool cool
down.
Tool operates
slowly. Forcing tool to work too
fast.
Using incorrect extension
cord size.
Allow tool to work at its own
rate.
Use proper size extension cord.
Performance
decreases over
time. Bits or blades dull or
damaged. Replace bits or blades as
needed.
Tool is
overheating. Forcing tool to work too
fast.
Bits or blades dull or
damaged.
Blocked vents.
Motor being strained by
long or small diameter
extension cord.
Allow tool to work at its own
rate.
Replace bits or blades as
needed.
Clear vents.
Use proper size extension cord.
Troubleshooting
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________