4
1
•
888
•
557
•
3848
Wards.com
4
5
Installation
Parts & Features
1. After unpacking, dispose of all packing materials in accordance with local
ordinances.
2. Position the refrigerator on a solid, level surface. Lock the wheels to secure in
place.
3. Refrigerator should have a minimum of 2 inches of clearance around the entire
unit to allow for adequate ventilation.
4. Allow the unit to sit upright and undisturbed for 30 minutes before plugging in.
5. After the unit has settled for 30 minutes, plug the unit into an outlet that is ap-
proved for the voltage listed on the rating plate.
6. Turn the temperature control knob to the desired temperature, with 1 being cool
and 5 being the coldest. Factory default is 3.
Use and Care Instructions
Now that your Toolbox Fridge is set up and ready to use, there are a few basic
things to keep in mind:
• Allow 1/2 inch of space between the items in the fridge and the interior walls.
This will keep the air circulating properly and prevent the condenser from
operating unnecessarily.
• Condensation can form on the inside of the door when the humidity is above
65%. This is normal. Keep door closed and the seal clean.
• The condenser coils are located inside the walls of the appliance, which can
cause the walls to become warm. Avoid putting heat sensitive items next to unit.
• When refrigerant passes through the condenser coils, it can cause a bubbling
sound.
To keep your appliance looking good and in proper working order, follow these
cleaning instructions:
• Clean interior and exterior with soapy water and a soft cloth. Never use an abra-
sive cleanser or pad as this could damage the finish.
• Vacuum or brush the condenser unit on the back of the appliance to avoid dust
buildup.
• Clean the door with a soft, damp cloth.
Temperature Adjust Button
Housing
Drawers
Handle
Auto Door Light
Wheels
Shelf
Door
