background image

4

1

888

557

3848

Wards.com      

4

5   

Interior 

Light

Tinted

Double Pane

Glass Door

Adjustable Leveling Legs

Glass  

Shelves

Chrome

Wire Rack

Stationary Drip Tray (Not Shown)

Lock/Unlock/Light

LCD/Temperature 

Display

Temperature  

Increase/Wamer

Important Safeguards 

(cont’d)

15.  Do NOT install in a room that is lower than 55° F.
16.  Avoid the use of an extension cord. If it is absolutely necessary to use an  

extension cord, the marked rating must be equal to or greater than the rating of 
the appliance. Only use a 3-wire extension cord with a 3-blade grounding plug.

3-Prong Plug

This appliance has a 3-prong plug for use in a 3-prong (grounding) outlet to mini-
mize the possibility of electric shock. This appliance should only be used with a 
120V, 60Hz grounded outlet. Failure to follow these instructions could result in fire, 
electrical shock, serious injury or death.  

If the plug does not fit fully in the outlet, contact a qualified electrician to install a 
3-prong (grounding) outlet. Do not attempt to modify the plug in any way. Failure to 
follow these instructions could result in fire, electrical shock, serious injury or death.

Temperature  

Decrease/Colder

Control Panel

Parts & Features

Installation

1.  After unpacking, dispose of all packing materials in accordance with local 

ordinances.

2.  Position the beverage center on a solid, level surface. Use the leveling legs to 

adjust level, if necessary. Turn the leveling legs clockwise to lower the unit or 
counterclockwise to raise.

3.  Beverage center should have a minimum of 2 inches of clearance around the 

entire unit to allow for adequate ventilation.

4.  Allow the unit to sit upright and undisturbed for 8 hours before plugging in.
5.  After the unit has settled for 8 hours, plug the unit into an outlet that is  

approved for the voltage listed on the rating plate. A beep will sound.

6.  The LCD will display the factory default temperature setting of 46° F for the 

internal temperature of the appliance.

Control Panel Settings

To access the control panel settings, press and hold the Lock/Unlock button for 
three seconds. A beep will sound.

Interior Light:
Turn on the interior light by pressing the Lock/Unlock button. The interior light will 
not activate when the control panel is locked.
 
Temperature Controls:

Adjust the temperature setting by pressing the up and down arrow buttons. The 

temperature range is 40° F - 61° F and will increase/decrease one degree at a time. 

Once the desired temperature has been reached, press the Lock/Unlock button.

NOTE: The control panel automatically locks after 30 seconds of inactivity.

Reviews: