1
•
888
•
557
•
3848
Wards.com
7
6
Parts & Features (cont.)
Installation
WARNING: Product failure due to improper installation is not covered under the
warranty. You MUST use proper installation procedures as described
in these instructions.
Tools you will need:
Phillips screwdriver, tape measure and knife or scissors
Tools you may need:
pencil or saw
WINDOW SLIDER KIT
The window slider kit has been designed to fit most standard windows. It will be
used to properly vent the exhaust pipe to the outside.
LOCATION
1. The air conditioner should be placed on a firm surface to minimize noise and
vibration. Place the unit on a smooth, level floor.
2. The unit has casters, but it should only be rolled on smooth surfaces. Use caution
when rolling on carpet. DO NOT attempt to roll the unit over objects.
3. The unit must be placed within reach of a window and a properly rated electrical
outlet.
4. Never place any obstacles around the unit air inlets or outlets.
5. Allow 10–40" of space between the unit and walls for efficient air-conditioning.
slider kit pieces (2)
bolt
exhaust hole
Remote Controller
Controller appearance and/or configuration may differ from the example shown.
If the unit does not have a particular function, pressing that button on the remote
controller will have no effect.
Power
Sleep
LED
Fan
Mode
Timer Off
Timer On
Short Cut
Temperature
Up/Down
Note:
The remote control must be used within 9 yards of the unit. The unit will
beep when a remote signal is received. Curtains, other materials and direct
sunlight can interfere with the signal.
Summary of Contents for 769117
Page 9: ...15 14 11...
