14
INSTALL THE DRAWER
Insert the full width drawer by lining up the inner slides on the drawer with the outer
sliders on the side braces.
PLUG IN THE POWER STRIP
To provide power to the power strip, open the cord attachment panel on the front of the
power strip next to the on/off switch and attach the master power cord. Plug the master
power cord into a grounded power source. Flip the power switch on – it will turn red to
let you know that the power strip is active. Store the master power cord in the handy cord
wrap located above the power strip when not in use.
PRIVACY COMPARTMENT
The privacy compartment can be locked for greater security. The lid can also be raised to
form an easel that can be used to display a tablet, other electronic device or paperwork.
There are several notches that allow you to adjust the angle of the easel. We recommend
leaving the lid down in the locked position when the cart is not in use.
INSTALL A ROD OR DOWL (OPTIONAL)
You can insert a rod or dowel (not included) in the extra large hole in the frame posts to
hold spools of wire or other rolls of material. Do not let the wire or other material drag and
get caught in the swivel casters.
Drawer
Privacy compartment
with easel
Holes
for rod
or dowl
Power strip and
cord wrap for
master power cord
