13
8
INSTALL THE POWER TOOL RACK AND ADJUSTABLE SHELF
Using a soft surface to protect the finish, place the adjustable shelf, with the flanges
facing up, over the power tool rack. Line up the holes and insert six M6 x 12 mm bolts
through the adjustable shelf and into the power tool rack. There are welded in nuts on the
power tool rack that the bolts will screw into.
Position the adjustable shelf at the desired level. Line up the holes in the adjustable shelf
with the holes in the frame posts. You can use any holes except the extra large holes
near the bottom of the frame posts. Insert one M6 x 12 mm into each hole in the frame
post and through the holes in the adjustable shelf. Secure with a M6 nut on the inside of
the shelf.
6
8
8
