9
Place the worktop and hutch back onto the
cabinet. Make sure that both the hutch and
the worktop are flush with the front edge of
the cabinet and that there are equal gaps on
the sides.
Connect the hutch, worktop and cabinet
together using six M8 x 40 hex bolts
and washers. An open end wrench is
recommended for tightening the hex bolts.
1
2
3
4
5
6
Install the shelf in the hutch using four
M8 x 20 hex bolts and washers.
CONNECTING THE HUTCH TO A CABINET WITHOUT A WORKTOP
You may also install the hutch on the cabinet
without a worktop.
Remove the worktop by first removing the
drawers, then loosening the M6 x 12 Phillips
head bolts.
Place the hutch directly on the cabinet
top and attach with six M8 x 20 hex bolts.
An open end wrench is recommended for
tightening the hex bolts.
