Montesa 4Ride MST260 2016, Shop Manual

Page: 114 / 158

4-6 4-6
Frame servicing
Hold the axle holder in a vise protected with a piece of
woods or soft jaws to avoid damage.
Do not overtighten the vise.
Install the right fork center bolt with a new sealing washer.
Tighten the right fork center bolt to the specified torque.
Torque: 23,5-25,5 N•m (2,39-2,59 kgf•m)
(1) FORK DAMPER
(2) RIGHT FORK CENTER BOLT
Install the stop ring into the slider groove securely.
Install the dust seal.
Install the centering plate and fork damper into the fork
tube.
(1) FORK DAMPER
(2) CENTERING PLATE
(3) FORK TUBE
(1) FORK SEAL DRIVER
Using the special tool, drive the guide bushing and back-
up ring until the stop ring groove is fully stuck in the fork
slider base.
Install the oil seal (spring up) in the fork slider. Drive the
oil seal using the special tool, performing a constant pres-
sure until stops in back-up ring.
Tool:
Fork seal driver 07947–4630100
(1) GUIDE BUSHING (4) STOP RING
(2) BUCK-UP RING (5) DUST SEAL
(3) OIL SEAL
3 2 1
1
5
4
3
2
1
2
1