© 2011 Monte Carlo Fan Company
5/10/2012
4
For Canadian installation and for USA fan and light
kit combinations over 35 lbs, in both flush and
downrod modes the safety cable must be installed
into the house structure beams using 3” lag
screws, washers and lock washers provided. Make
sure that when the safety cable is fully extended
the lead wires are longer than the cable and no
stress is placed on the lead wires.
note
:If Installing The Secondary Support Safety
Cable in the U.S., Do Not Remove Knockouts In
The Outlet Box.
11
Safety cable installation
safety cable
lag screw
safety
cable
3” lag
screw
lock
washer
washer
Next lift the cover ring and install
knurled nuts as shown. Tighten the
knurled nuts securely. The canopy
should adjust for any irregularity in
the ceiling or outlet box.
Go to step 25 to finish instllation
17
Summary of Contents for 5GIR54XXD-L Series
Page 10: ......
