Montarbo WIND PRO 208A Owner'S Manual Download Page 13

13

 

Series 

WIND PRO A

 |  Owner’s manual  |

The lighting flash with arrowhead symbol within an equilateral triangle, is intended to alert the 

user to the presence of uninsulated ’dangerous voltage’ within the product’s enclosure, that may 

be of sufficient magnitude to constitute a risk of electric shock to humans.

The exclamation point within an equilateral triangle, is intended to alert the user to the presence 

of important operating and maintenance (servicing) instructions.

WARNING

In order to protect your own and others’ safety and to avoid invalidation 

of the warranty of this product, please read this section carefully 

before operating this product.

.

This product has been designed and manufactured for being operated as active speaker 
system in the applications tipical of a sound reinforcement system or of a sound recording 
system. Operation for purposes and applications other than these has not been covered 
by the manufacturer in the design of the product, and is therefore to be undertaken at 
end user’s and/or installer’s sole risk and responsability.
This unit conforms to Class I insulation, and for safe use it is required that the protective 
earth contact is connected to a grounded (earthed) outlet.

TO AVOID THE RISK OF FIRE AND/OR ELECTRIC SHOCK

:

• Never expose this product to rain or moisture, never use it in proximity of water or on 
a wet surface. Avoid dripping water or water sprays, moreover never place objects full of 
liquid, such as vases, on top of it. Never let any liquid, as well as any object, enter the 
product. In case, immediately disconnect it from the mains supply and refer to servicing 
before operating it again. Never place burning candles or other sources of open flame on 
top of the device.
• Before connecting this product to the mains supply, always make sure that the voltage 
on the mains outlet corresponds to that stated on the product.
• This product must be connected only to a grounded mains outlet complying to the safety 
regulations in force via the supplied power cable. In case the power cable needs to be 
substituted, use exclusively a cable of the same type and characteristics.
• Before undertaking any sort of maintenance work etc., always make sure it has been 
unplugged from the mains socket. 
• Never place any object on the power cable. Never lay the power cable on a walkway 
where one could trip over it. Never press or pinch it.
• Never install the product without providing adequate airflow to cool it. 
Never obstruct the air intake openings on it. Leave enough room to get to the mains power 
socket and the mains connector on the back panel.
• In case the external fuse needs replacement, substitute it only with one of the same 
type and rating, as stated on the product.
• Before attempting to move the product after it has been installed, remove all the connections.
• To disconnect the power cable of this product from the mains supply never pull the cable 
directly. Hold the body of the plug firmly and pull it gently from the mains supply outlet

..

• Before placing the product on a surface of any kind, make sure that its shape and 
load rating safely match the product size and weight. 
When installing the speaker system on a stand, use a stable stand that will fit in 
the adapter and may carry the loudspeaker weight. When two loudspeakers are laid 
one upon the other, make sure that stability is guaranteed by matching the upper 
loudspeaker feet to the lower loudspeaker cavities.
• To avoid shocks, kicks, or whatever action, always reserve a protected area with no access 
to unqualified personnel as installation site of the product.  
In case the product is used near children and animals closest supervision is necessary.
• This product can generate very high acoustic pressures which are dangerous for the 
hearing system. Always avoid operation at loud levels if anyone is excessively near to the 
product (at least 1 m of distance). 

[!]

 

Never expose children to high sound sources

.

IMPORTANT! SAFETY INSTRUCTIONS

ENGLISH

PACKAGE CONTENTS

 

Bi-amplified, active loudspeaker system 

 

 

Power supply cable

 

 

Owner’s manual 

[MN-M000098]

CAUTION

This product does not contain user serviceable parts. To prevent fire and/or 
electrical shock, never disassemble it or remove the rear panel. For mainte-
nance and servicing always refer to the official Montarbo Distributor in your 
Country or to qualified personnel specifically authorised by the Distributor.

Summary of Contents for WIND PRO 208A




























Reviews: