Montarbo MT180A Instruction Manual Download Page 8

Page: 8 / 23

processor controlled active system

MT180A

This product has been designed and manufactured for being operated as

active speaker system in the applications tipical of a sound reinforcement
system or of a sound recording system. Operation for purposes and in
applications other than these has not been covered by the manufacturer
in the design of the product, and is therefore to be undertaken at end
user's and/or installer's sole risk and responsability.

TO AVOID THE RISK OF FIRE AND/OR ELECTRIC SHOCK:

•

Never expose this product to rain or moisture, never use it in proximity

of water or on a wet surface. Never let any liquid, as well as any object,
enter the product. In case, immediately disconnect it from the mains supply
and refer to servicing before operating it again.

•

Before connecting this product to the mains supply, always make sure

that the voltage on the mains outlet corresponds to that stated on the
product.

•

This product must be connected only to a grounded mains outlet

complying to the safety regulations in force via the supplied power cable.
In case the power cable needs to be substituted, use exclusively a cable of
the same type and characteristics.

•

Never place any object on the power cable. Never lay the power cable

on a walkway where one could trip over it. Never press or pinch it.

•

Never install the product without providing adequate airflow to cool it.

Never obstruct the air intake openings on it.

•

In case the external fuse needs replacement, substitute it only with one

of the same type and rating, as stated on the product.

•

Always make sure the On/Off switch is in its 'Off' position before doing

any operation on the connections of the product.

•

Before attempting to move the product after it has been installed,

remove all the connections.

•

To disconnect the power cable of this product from the mains supply

never pull the cable directly instead, hold the body of the plug firmly and
pull it gently from the mains supply outlet.

Before placing the product on a surface of any kind, always make sure

that its shape and load rating will safely match the product's size and
weight. Never attempt to hang the product by any means not expressly
provided or approved by the manufacturer (i.e. ropes, chains, belts or
whatever medium, throgh carring handles, bolts, hooks or whatever).
In case the product is factory-fitted with specific mounting hardware,
always verify before installation that the lifting and/or hanging system
you intend to use is of a proper type and can carry the product weight
with the safety ratio required by the regulations in force.

To avoid shocks, kicks, or whatever action, always reserve a protected

area with no access to unqualified personnel as installation site of the
product. In case the product is used near children and animals closest
supervision is necessary.

This product can generate very high acoustic pressures which are

dangerous for the hearing system. Always avoid operation at loud levels
if anyone is excessively near to the product (at least 1 m of distance).
Never expose children to high sound sources.

The lighting flash with arrowhead symbol within an equilateral triangle, is
intended to alert the user to the presence of uninsulated 'dangerous voltage'
within the product's enclosure, that may be of sufficient magnitude to constitute
a risk of electric shock to humans.

The exclamation point within an equilateral triangle, is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the product.

WARNING

In order to protect your own and others' safety and to avoid
invalidation of the warranty of this product, please read this

section carefully before operating this product.

__________________________________________