Manual / EN
MOUNTING
1. Place the plinths on the floor where you want the cabinets to be. All adjustable
feet must be twisted in on hard floor, and twisted out 1-2 mm on soft floor/carpet.
2. Locate the highest point of the plinth. (Often is the highest point in a corner tow-
ards the wall).
3. Level the rear edge of the plinths measured from the highest point
by adjusting with the adjustable feet. Use a bubble level to check if
the rear edge is 100 % leveled up.
4. Afterwards level the front edge of the plinths in the same way by means of adju-
stable feet and the bubble level until both depth and length is 100 % leveled up.
5. Join the plinths by drilling a Ø8 hole in the plinth ends where they need to be joi-
ned, then mount the enclosed connecting screws.
6. Place the cabinets on the plinths.
NB: When two cabinets are placed on top of each other you must put anti-slip rubber
pieces in between.
