Blitzer Assembly Manual
Page 2 of 21
INTRODUCTION:
The Blitzer is intended to be a next step up from our greatly-loved Blitzer Reno-style P-51. We increased
wing area, lowered the wing loading, and added room in the fuselage to make equipment installation easier.
The Blitzer is just as nice a flyer.
In the construction manual, we make only a few assumptions – the biggest is that you have built a model
airplane before. The Blitzer probably isn’t the best choice for a first construction, but it is certainly fine for a
second one. It is not good for inexperienced pilots, either, though the low wing loading will give an
experienced pilot the ability to fly just about any maneuver. As a pilot, you need to be able to handle a high-
speed aileron trainer as a minimum. Since we cannot control your building nor piloting skills, we can assume
no responsibility for your actions and any damage they may cause.
Please feel free to e-mail us your comments, positive or negative.
Andy
Montana Design
409 S. Sixth Street
Morris Park
Phillipsburg, NJ 08865
www.flyinghobbies.com
