MONTAGUE Salamander SB36, Instruction Manual, Page: 17 / 30

SERVICE & ADJUSTMENT PROCEDURES
SB 36 SB 3618
A
B
C
SB 3618 MAIN BURNER PARTS
A. Main burner orifice
Unscrew orifice from valve to
remove debris. Replace if needed.
B. Air Shutter
Clean shutter opening of lint and
debris. Adjust shutter open
or closed until desired flame is
achieved.
C. Gasket
Replace burner gasket each time
burner is serviced.
SB 3618 CERAMICS
Visually inspect ceramic targets for
damage ( cracks or broken radiant
points) and replace as needed.
16