MTX HOTAS INSTRUCTION MANUAL
MTX HOTAS INSTRUCTION MANUAL
6
7
1.1.5 Angle Bracket Assembly
For some assemblies the use of angle brackets is required. These are prepared by using two
(2) M8x18 hex screws, two (2) washers, and two T-Nuts.
Figure 5: Angle bracket assembly
1.1.6 Adjustment of Profile Feet
The profile feet are installed on the MTX HOTAS or MTX Stand-Alone TV
Figure 6: Profile feet
2 Overview
2.1 Completed MTX HOTAS
HOTAS - Overview
Figure 8:
Use the above image as reference for the following assembly inst-
ructions.
