S502 26” Electric Bicycle
©2019 MONSTERPRO
7
V-Brake
Loosen the clamp that holds the brake cable with an Allen key if necessary.
Hold each arm in towards the rim of the wheel and pull the loose brake cable through the clamp.
Lock the nut into the position.
Once you have pulled the cable tight, use an Allen key to tighten the clamp. This will hold the cable in
place.
Make sure that the bolt is tightly holding the brake cable before you ride!
Front Mudguard & Headlight
Attach the
mudguard and headlight’s mount stay to the lower of
the twin fork blade mounts, using both a
small and large washer centre the guard and, tighten from the hex key end.
During tightening, recheck for centring and possibly raise or lower the guard.
